Hello all. My father in law was getting ready to trash his JD L100 and I decided to take it. He accidentally used the wrong oil and overfilled it and started it. It started up and oil went everywhere and he shut it down and it hasn't ran right since. So I took the valve cover off lastnight and noticed that the one valve cap came off so I put it back on and adjusted the valves back to specs and it started up and ran and I even got to cut my grass. Well when I was almost finished I noticed it leaking oil. The oil is coming out of the center of the fuel pump from that screen/mesh area of the pump. I looked and the oil level is where it should be. Hooked up my compression tester and it held pressure for an hour so I took it off and put the spark plug back in. Changed the oil to 30wt. Started it up, it ran for about 3-5 minutes and started to sputter and then it died. I crank it back over it started right up and noticed my oil leak. Oil is starting to pour out of the fuel pump. My guess is it was getting oil instead of fuel causing it to stall out. Should I try a new fuel pump? I'm lost on this.
Help with JD L100. HOPEFULLY :/
Aucun commentaire:
Enregistrer un commentaire