So, this is the 3rd time I have to fix a complete sheared spline shaft and pulley off. This is the blade by the discharge side.
Here's what my problem looks like
Capturem2.jpg
Any ideas why this would be happening? The parts involved here are: the assembly, a spacer, pulley and nut as such:
Capturem3.jpg
I have noticed that the nut is really hard to turn as it reaches the pulley due to the locking mechanism on the nut (the internal threads on the nut seem to be pressed)
The first time, I noticed there was a bit of axial play along the shaft which was the cause of such failure, so the second time I made sure there was no play, but it happen again.
Any ideas?
Here's what my problem looks like
Capturem2.jpg
Any ideas why this would be happening? The parts involved here are: the assembly, a spacer, pulley and nut as such:
Capturem3.jpg
I have noticed that the nut is really hard to turn as it reaches the pulley due to the locking mechanism on the nut (the internal threads on the nut seem to be pressed)
The first time, I noticed there was a bit of axial play along the shaft which was the cause of such failure, so the second time I made sure there was no play, but it happen again.
Any ideas?
Hustler Raptor - Shearing Spline Shaft and Pulley
Aucun commentaire:
Enregistrer un commentaire