Electric pto clutch on my simplicity regent 1693915
With the tractor running and pto energized no noise (confirmed this with deck off).
With tractor running and pto not energized you can hear a light rubbing/grinding sound from clutch. I confirmed this noise with tractor off and trying to turn the clutch by hand. Other than the noise it works fine.
I took the clutch off and verified the gaps were set at about .020". I loosened the 3 adjuster nuts and the noise went away but my gaps were about .050". What im finding is the moveable brake houseing is rubbing on the rotating armature when the gaps are adjusted properly. Is this normal?
I cant figure out how to take this clutch apart to get a good look at whats going on.
With the tractor running and pto energized no noise (confirmed this with deck off).
With tractor running and pto not energized you can hear a light rubbing/grinding sound from clutch. I confirmed this noise with tractor off and trying to turn the clutch by hand. Other than the noise it works fine.
I took the clutch off and verified the gaps were set at about .020". I loosened the 3 adjuster nuts and the noise went away but my gaps were about .050". What im finding is the moveable brake houseing is rubbing on the rotating armature when the gaps are adjusted properly. Is this normal?
I cant figure out how to take this clutch apart to get a good look at whats going on.
Electric pto question
Aucun commentaire:
Enregistrer un commentaire